Licensed & Insured, in Paterson and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Paterson
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (973) 333-4969 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Paterson and surrounding areas · On-site visits included · Free estimate within 24h
Paterson Metal Roofing is a team of local certified professionals based in Paterson. We respond quickly in Paterson and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (973) 333-4969⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews
“We had Paterson Metal Roofing out to fix up the roof on our old warehouse out in the rural part of the county. The corrugated panels were rusted through in spots and they replaced the bad sections and re-fastened everything. Crew of four knocked it out in two days and hauled off every last scrap of the old metal.”
Commercial Metal Roofing
“Got a metal roof installed over our old porch shingles and it came out better than I expected. They matched the trim to the house and cleaned up so well you couldn't even tell they'd been working there. Small gripe is the estimate took a few days to come through, but the actual install was smooth.”
Metal Roof Over Shingles (Retrofit)
“Had them put up a metal roof on the detached hangar in my backyard and I'm honestly impressed with how solid it feels. They used ribbed panels, screwed everything down tight, and even added snow guards since we get hammered up here. Two guys, one long day, and they swept the whole yard before leaving.”
Metal Roof Installation
“We went with standing seam for our house and the crew did a beautiful job on the seams and flashing around the chimney. It rained hard a week later and not a drop came through. Worth every penny.”
Standing Seam Metal Roofing
“They came out to put a vent cap on our roof after the old one started leaking in storms. Turned out the flashing around it was shot too, and they fixed that while they were up there. Fair price, quick work, and they showed me photos of the repair before they left.”
Flashing, Chimney & Skylight Repair
“Our old roof was failing and we finally pulled the trigger on a full metal replacement. Paterson Metal Roofing tore off the old stuff, fixed a couple of soft spots on the deck, and had the new stone-coated steel on in three days. The house looks completely different and the neighbors keep asking who did it.”
Metal Roof Replacement
“Solid work on our metal roof. They walked me through the panel options, didn't upsell me on anything, and the install crew was respectful and tidy. Only reason it's not five stars is the scheduling got pushed back a week, but they kept me posted the whole time.”
Metal Roof Installation
“Replaced the old failing roof on our brick house with a new metal one and the difference is night and day. They handled all the flashing and gutter tie-ins so nothing looks patched together. You can barely hear the rain now, which I did not expect at all.”
Metal Roof ReplacementReal photos of our work in Paterson · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel installation | Starting at $8/sq ft | Includes panels, fasteners and basic trim; price rises with roof pitch, dormers and deck repair. |
| Standing seam installation | Starting at $14/sq ft | Concealed clips and raised seams included; complexity, panel gauge and snow guards move the price. |
| Metal shingle or stone-coated steel | Starting at $12/sq ft | Includes underlayment and trim; historic profile and color choices affect material cost. |
| Full tear-off and redeck | On estimate | Multiple shingle layers or soft sheathing need an on-site look before we quote the deck work. |
| Travel | Included | In Paterson and surrounding Passaic County towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (973) 333-4969, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, simple gable roof | Starting at $10/sq ft | Includes tear-off, underlayment and mechanically seamed panels on a straightforward pitch. |
| Standing seam, complex roof with dormers | Starting at $14/sq ft | Covers extra flashing, valleys and snow guards on steep or cut-up roof planes. |
| Low-slope standing seam section | Starting at $12/sq ft | Wider panels and taller seams for porch roofs, bays and rear additions. |
| Standing seam over existing shingles | On estimate | Retrofit pricing depends on existing layer count, deck condition and purlin layout. |
| Travel | Included | in Paterson and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (973) 333-4969, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Tear-off and metal replacement, simple pitched roof | Starting at $9/sq ft | Includes tear-off, disposal, deck inspection and new metal; pitch and layer count move the price. |
| Tear-off with deck repair | Starting at $11/sq ft | Adds sheathing replacement at ice-dam areas; soft eave decking is the main cost driver. |
| Standing seam or stone-coated steel system | Starting at $14/sq ft | Concealed-fastener or panelized system with premium trim; profile and panel gauge drive cost. |
| Copper or specialty metal accents | On estimate | Soldered copper bays, mansards and detail work need an on-site look before pricing. |
| Travel | Included | In Paterson and surrounding Passaic County towns, no separate call-out or mileage fee. |
| Estimate | Free | Written scope within 24 hours at (973) 333-4969, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener retrofit over one shingle layer | Starting at $7/sq ft | Includes underlayment, corrugated or ribbed panels, trim and basic flashing over sound decking. |
| Standing seam retrofit over shingles | Starting at $12/sq ft | Concealed fasteners, custom panel lengths and trim, priced higher on steep or complex roofs. |
| Metal shingle or stone-coated steel retrofit | Starting at $10/sq ft | Panel style and color drive the price, and historic district review may add design time. |
| Deck repair or partial redeck | On estimate | Soft sheathing, rotted fascia or rafter repairs need an on-site look before pricing. |
| Travel | Included | in Paterson and surrounding Passaic County towns, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (973) 333-4969, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (flashing, sealant, small patch) | Starting at $450 | Includes inspection, one flashing or sealant repair, and water test; access and pitch raise the price. |
| Panel replacement (single panel or small section) | Starting at $850 | Includes matching panel, fasteners, and sealant; panel type and gauge drive the final cost. |
| Screw replacement and re-fastening (per section) | Starting at $650 | Covers a run of failed screws with oversized fasteners; roof size and access affect the total. |
| Storm damage repair (wind, hail, limb strike) | On estimate | Scope varies with damage spread; we inspect and document before quoting so insurance paperwork is accurate. |
| Travel | Included | In Paterson and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (973) 333-4969, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted fastener and seal repair | Starting at $450 | Includes diagnosis, failed screw replacement, and seam resealing at the confirmed leak point. |
| Flashing rebuild (chimney, skylight, pipe boot) | Starting at $650 | Includes removal of failed flashing, new metal detail, and sealant; price rises with height and disassembly. |
| Panel re-fastening and re-seaming | Starting at $900 | Covers re-securing lifted panels and closing seams; scope depends on how many panels are affected. |
| Emergency tarping after storm | Starting at $350 | Stabilizes an active leak same day; permanent repair is quoted separately once conditions allow. |
| Travel | Included | in Paterson and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (973) 333-4969, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted slope re-fastening | Starting at $750 | Covers one windward or damaged slope with oversized screws and new UV-resistant washers, priced by fastener count and access. |
| Full field re-fastening | Starting at $1,450 | Replaces every field, eave and ridge fastener and re-torques to spec, priced by roof size and pitch. |
| Fastener plus panel repair | Starting at $1,900 | Re-seats loose panels, replaces failed screws and seals laps, priced by panel count and deck condition. |
| Deck or underlayment repair | On estimate | Needs an on-site look because the scope depends on how much rot or water damage sits under the fastener lines. |
| Travel | Included | in Paterson and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (973) 333-4969, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof (garage or shed) | Starting at $5.50/sq ft | Includes panels, fasteners, closures and basic trim; price rises with roof height and access difficulty. |
| R-panel roof (workshop or addition) | Starting at $6.50/sq ft | Includes heavier gauge panels and trim; price moves with span, penetrations and deck condition. |
| Tear-off and redeck | Starting at $8.00/sq ft | Includes removal of old roofing and deck repairs; price depends on layers and rot found. |
| Retrofit over existing shingles | On estimate | Purlins and panels over existing roof; needs an on-site check for code and structure. |
| Travel | Included | In Paterson and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (973) 333-4969, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof replacement (tear-off) | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment, and standard flashing; pitch and valleys move the price. |
| Metal shingle over existing shingles | Starting at $7/sq ft | Retrofit over one sound layer where code allows; existing roof condition and layer count decide feasibility. |
| Slate or shake profile upgrade | Starting at $11/sq ft | Premium stamped profiles for historic districts; detail work on dormers and mansards raises the rate. |
| Repair or re-fastening | On estimate | Lifted, dented, or loose shingles need an on-site look to price the scope and match the profile. |
| Travel | Included | In Paterson and surrounding Passaic County towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (973) 333-4969, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel installation, standard pitch | Starting at $9/sq ft | Includes underlayment, panels and basic trim; steep pitch or dormers raise the rate |
| Stone-coated steel over existing shingles (retrofit) | Starting at $8/sq ft | Saves tear-off and dumpster cost; code limits existing layers and deck condition matters |
| Full tear-off with deck repair | Starting at $11/sq ft | Strip to sheathing, replace rot, new underlayment; rot extent drives the final number |
| Complex or historic-profile job | On estimate | Mansard, multiple valleys and historic district review need an on-site look before pricing |
| Travel | Included | in Paterson and surrounding Passaic County towns, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (973) 333-4969, no obligation to book the work |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent and detail work | Starting at $20/sq ft | Includes formed copper for bay windows, porch roofs and flashing; complexity of the radius moves the price. |
| Zinc or aluminum specialty panels | Starting at $22/sq ft | Includes panels, underlayment and standard flashing; low-slope geometry and access drive the number. |
| Full copper architectural roof | Starting at $35/sq ft | Includes soldered flat-seam copper over new substrate; turrets, dormers and historic profiles raise it. |
| Custom fabrication and soldering | On estimate | Curved turret caps, finials and complex valleys need shop time and an on-site look before pricing. |
| Travel | Included | In Paterson and surrounding Passaic County towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (973) 333-4969, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Acrylic coating, sound roof | From $2.50/sq ft | Includes wash, light prep and two coats; rust severity and roof pitch move the price. |
| Rust treatment and recoating | From $3.25/sq ft | Includes rust converter, spot primer and topcoat; number of rusted fasteners raises cost. |
| High-build silicone coating | From $3.75/sq ft | For low-pitch roofs with ponding; square footage and surface pitting drive the quote. |
| Spot repair and color match | On estimate | Isolated panel damage needs an on-site look to match color and confirm coating adhesion. |
| Travel | Included | In Paterson and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (973) 333-4969, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Chimney flashing repair | Starting at $600 | Covers new bent step and counter-flashing on a standard brick chimney with water test. |
| Skylight flashing repair | Starting at $750 | Includes curb pan inspection, new flashing and sealant, priced higher for re-framing. |
| Valley or sidewall flashing | Starting at $650 | Replacement of valley or sidewall metal with surrounding courses opened and re-laid. |
| Full chimney re-flash with mortar repair | On estimate | Needs an on-site look at brick condition, height and access before a number is given. |
| Travel | Included | in Paterson and surrounding Passaic County towns, with no separate call-out fee. |
| Estimate | Free | Response within 24 hours at (973) 333-4969, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-row guard install | Starting at $1,200 | One row of pad or bar guards on a typical single-family roof, with layout and fastening included. |
| Multi-row guard system | Starting at $2,400 | Two or more staggered rows for steep pitches or long eave runs over walkways and entries. |
| Ice-dam and eave protection | Starting at $850 | Eave flashing and underlayment checks added to a guard job where meltwater backup is present. |
| Complex or historic-district job | On estimate | Steep roofs, tight alleys, or design-review color requirements need an on-site look before pricing. |
| Travel | Included | in Paterson and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (973) 333-4969, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof walk, fastener audit, photo documentation, and written repair-versus-replace assessment |
| Minor repair | Starting at $350 | Single panel patch, flashing repair, or a handful of replaced screws and washers |
| Moderate repair | Starting at $900 | Multiple panels, ridge cap re-securing, or a partial slope re-fastening |
| Extensive storm damage | On estimate | Full-slope panel replacement or widespread wind damage needs an on-site look first |
| Travel | Included | In Paterson and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (973) 333-4969, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard metal roof inspection | Free estimate | Full walk inspection with photo report; roof size and panel type move the final price. |
| Pre-purchase or insurance inspection | Starting at $250 | Written report with photos and remaining service life; number of penetrations affects cost. |
| Exposed-fastener audit | Starting at $300 | Screw-by-screw review on corrugated and ribbed panels; panel count and access drive the price. |
| Complex or large-scale roof | On estimate | Steep mansards, historic districts and multi-building sites need an on-site look before quoting. |
| Travel | Included | In Paterson and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (973) 333-4969, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, 5-inch | Starting at $9/linear ft | Includes on-site forming, hidden hangers and standard downspouts; height and roof pitch raise the rate. |
| Seamless aluminum gutter, 6-inch high-capacity | Starting at $13/linear ft | Sized for standing seam and metal shingle runoff; extra outlets and long runs add to the total. |
| Snow guards above the gutter line | Starting at $6/linear ft | Roof-mounted retention sized to panel type and pitch; steep roofs and complex layouts cost more. |
| Copper or steel half-round | On estimate | Period-correct profile for historic and copper roofs; soldered joints and custom hangers need an on-site look. |
| Travel | Included | In Paterson and surrounding Passaic County towns, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (973) 333-4969, with no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written scope | Free estimate | On-site inspection with photos, measurements, and a written scope of the panel system options |
| Exposed-fastener corrugated or ribbed panel roof | Starting at $6.50 per sq ft installed | Screw-down panels, closure strips, and basic flashing included; deck repairs priced separately |
| Standing seam or insulated panel system | On estimate | Concealed fasteners or foam-core panels priced after deck, span, and access are verified on site |
| Repair, re-fastening, or coating | Starting at $450 | Leak diagnosis, screw replacement, flashing repair, or coating prep; larger scopes quoted after inspection |
| Travel | Included | in Paterson and surrounding Passaic and Bergen county areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (973) 333-4969, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Paterson need someone who understands the city's older housing stock, its steep pitches, and the way snow and ice sit on roofs here. Paterson Metal Roofing is a local contractor serving Paterson, Clifton, Passaic, Totowa, and Haledon, with a network of licensed, bonded, and insured local metal roofing contractors. We handle metal roof installation, replacement, re-roofs, and repairs on homes throughout the area, from the Victorian and Italianate roofs near the Great Falls to the brick Capes and bungalows in Hillcrest and the Totowa section.
This is a city of dense tree cover, heavy winter snow, and a large stock of aging screw-down roofs whose fasteners are beginning to fail. We know the difference between a roof that needs a few new screws and one that needs a full replacement. If you are ready for a free estimate, call us and we will walk the roof, explain what we find, and give you a straight answer.
Most metal roof leaks we see in Paterson start with the fasteners. On exposed-fastener roofs that are 15 to 30 years old, the EPDM sealing washers under each screw dry out, shrink, and crack, leaving a gap that lets water in. The screw itself may still be tight, but the seal is gone. Other common causes include seam separation from thermal movement, failed pipe boots and flashing at chimneys, skylights, and valleys, wind-lifted panels after a nor'easter, and punctures from fallen limbs. Each one has a specific fix, and each one gets worse if ignored: water can track along purlins and decking far from the entry point, rotting sheathing and damaging insulation before you ever see a stain on the ceiling.
The honest call between repair and replacement depends on the age of the roof, the condition of the panels, and how many fasteners are failing. Often, a full screw replacement with new sealing washers restores a watertight roof for a fraction of replacement cost. When the panels themselves are sound, that is the right move, and we will tell you so. When the metal is too far gone, we will explain why. Call (973) 333-4969 to schedule a metal roof leak repair inspection.
We also handle metal roof repair for storm damage, flashing failures, and isolated panel issues. Our goal is to fix what is broken and leave the rest alone, not to sell you a new roof you do not need.
We install the full range of metal roofing systems, and we match the system to the home rather than the other way around. Standing Seam Metal Roofing uses concealed clips and has no exposed screws to maintain, which makes it the premium choice for homeowners who want long-term durability and clean lines. Corrugated & Ribbed Panel Roofing is the economical workhorse, common on cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic homes.
The trade-off is simple: standing seam costs more up front and has no exposed fasteners to service, while screw-down costs less and needs its fasteners checked and replaced over time. When the existing deck is sound, Metal Roof Over Shingles (Retrofit) can be a legitimate option. When it is not, tear-off is the right call. We will tell you which applies to your roof.
Metal roof installation is typically quoted per square foot, while repairs are often flat-rate. The price depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, decking condition, and access. Typical ranges vary widely, and final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer. For a closer look at how we price work, see our pricing page.
We recommend requesting a free estimate or a free roof inspection so you can see the actual condition of your roof and get a written scope before any work begins.
After storm damage, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits, in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. We do not state specific thresholds, fees, or layer limits as fact, because those rules change and must be verified locally.
Requirements vary, always verify with the Paterson building or planning department before starting your project. If you have questions about your roof or want to schedule an inspection, contact us and we will help you understand the next step.
Ready to get started? Paterson Metal Roofing serves in Paterson and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Paterson · Response within 24h · No commitment · ☎ (973) 333-4969
Your Free Quote Request