Serving the Paterson area  ·  (973) 333-4969  ·  Open Mon-Sun 7am-7pm
📞 (973) 333-4969 Free Quote

Metal Roofing in Prospect Park, NJ (07508) · Local Professionals

Paterson Metal Roofing · Fast response in Prospect Park and the Paterson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+283Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Prospect Park is a small, tight-knit borough tucked between Paterson and Hawthorne, where most of the housing stock dates back to the early 1900s. You see it in the compact brick and frame homes, the narrow lots, and the low-pitched or flat roofs that have taken a beating from Passaic County winters. The borough sits just east of the Great Falls and the Passaic River, and the terrain rolls with the same rocky Piedmont that defines the surrounding area.

Homeowners in Prospect Park (07508) call Paterson Metal Roofing because we know these older roofs inside and out. Whether your shingles are curling on a 1920s frame house near the high school or your flat roof is leaking over the kitchen, we have seen the same problems on block after block. We are based in Paterson, just minutes away, and we treat Prospect Park like our own neighborhood.

Metal Roofing in Prospect Park (07508)

Prospect Park's housing stock is dominated by early 20th-century brick and frame homes on small, closely spaced lots. Many of these houses still have their original low-slope or flat roofs, and the tight setbacks mean access can be tricky. We often have to stage materials on the street or in the driveway and use compact equipment to avoid damaging neighboring property. The rocky ground and mature street trees (Norway maples, sycamores, and oaks) mean gutters fill fast, and ice dams form at the eaves when snow sits on a roof that was never designed for modern freeze-thaw cycles. Metal roofing is a smart upgrade here because it sheds snow and rain, handles the freeze-thaw without cracking, and lasts decades longer than the worn shingles we replace.

Our team has worked on dozens of homes in Prospect Park and the surrounding Paterson neighborhoods. We understand the local building department's permit requirements and can help you navigate the process, whether you are doing a full replacement or a metal roof over existing shingles. We also know which roof profiles and colors fit the character of these older homes, so your new roof looks right for the block.

Our services in Prospect Park

How a Job Works in Prospect Park

Step 1: You call us at (973) 333-4969 or request a free estimate online. We schedule an on-site assessment at your convenience, usually within a day or two. We inspect your current roof, check for leaks, soft spots, and flashing issues, and talk through your options. You get a written estimate with clear pricing before any work begins.

Step 2: Once you approve, we pull the necessary permits from the Prospect Park building department and schedule the work. On the day of the job, our crew arrives early, protects your landscaping and siding, and gets to work. For a metal roof over shingles, we install new underlayment and panels right over the existing roof, which saves time and landfill waste. If access is tight, we use smaller trucks and careful staging to keep the street clear and your neighbors happy.

Step 3: When the job is done, we do a full cleanup, including a magnet sweep for nails and a final walkthrough with you. We make sure you understand the warranty and how to care for your new metal roof. We do not leave until you are satisfied and your property is spotless.

Pricing in Prospect Park depends on the size and pitch of your roof, the condition of the existing shingles, and how accessible the property is. For a typical 1,200 to 1,800 square foot home, metal roof over shingles starts at $7 per square foot, while a full replacement with standing seam runs from $10 per square foot. Metal roof repair, like fixing a leak or replacing failed fasteners, starts at $450. We always provide a free estimate with a detailed breakdown, so you know exactly what you are paying for. Call (973) 333-4969 to schedule yours.

My house near the Prospect Park train station has a flat roof that pools water. Can metal roofing fix that?
Yes. Flat and low-slope roofs are common in Prospect Park, especially on the older brick and frame homes. We can install a standing seam or corrugated metal roof with a slight pitch to improve drainage, or use a metal roof coating system to seal and protect the existing surface. We will assess your roof's structure and recommend the best solution to stop pooling and leaks.
How fast can you respond to storm damage in Prospect Park?
We offer free inspections for storm and wind damage, and we prioritize emergency calls in Prospect Park because we are just minutes away in Paterson. Call (973) 333-4969 and we will schedule an inspection as soon as possible, often the same day. We can tarp or secure your roof to prevent further damage and provide a repair estimate.
What does a metal roof over shingles cost for a typical Prospect Park home?
For a standard 1,500 square foot roof, metal roof over shingles starts around $7 per square foot, so you are looking at roughly $10,500 for materials and labor. The exact price depends on the number of existing shingle layers, roof complexity, and access. We give you a firm quote after a free on-site estimate.
Do I need a permit for a metal roof in Prospect Park?
Yes, roofing permits are typically required for a full replacement or re-roof in Prospect Park, and the requirements vary. We handle the permit application and inspections for you, ensuring the work meets local building codes. We will also check if your home is in a historic district or subject to HOA rules that might affect the panel style or color.
My neighbor and I share a property line. How do you handle roof work near the boundary?
We are careful to respect property lines and work with your neighbor when access is needed. If your roof is close to the boundary, we will discuss staging and access with you beforehand. For HOA approvals, we can provide documentation and coordinate with your association to ensure the new roof meets their guidelines.
Are you insured for work on my Prospect Park home?
Yes, we are fully insured with general liability and workers' compensation coverage. You can have peace of mind knowing that your property and our crew are protected.
What maintenance does a metal roof need in Prospect Park's climate?
Metal roofs are low maintenance, but in Prospect Park's freeze-thaw climate, we recommend an annual inspection to check fasteners, seals, and flashing. Clear debris from gutters and keep snow from piling up at the eaves to prevent ice dams. We offer maintenance plans and can perform inspections to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Paterson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Paterson

All your work handled by qualified professionals in Paterson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

283+ Verified Client Reviews in Paterson

⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Paterson · Response within 24h · No commitment · ☎ (973) 333-4969

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Paterson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm