Serving the Paterson area  ·  (973) 333-4969  ·  Open Mon-Sun 7am-7pm
📞 (973) 333-4969 Free Quote

Metal Roofing in Haledon, NJ (07522) · Local Professionals

Paterson Metal Roofing · Fast response in Haledon and the Paterson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+283Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Haledon is a small hillside borough where the streets climb toward Prospect Park and the lots get tight, and the housing stock tells you exactly what kind of roof you are dealing with. You have 1920s frame two-families, brick Capes with dormers, and a fair number of older homes where the roof pitch and the tree cover both work against you. Ice dams at the eaves and wind-lifted panels after a nor'easter are the two calls we get most from 07522.

Homeowners here call Paterson Metal Roofing because we know the difference between a Haledon roof that needs a full tear-off and one that can be retrofitted with a metal system over the existing shingles. We are based just down the road in Paterson, so when you have a leak near Manchester Regional High School or off Belmont Avenue, we can get eyes on it fast and give you a straight answer.

Metal Roofing in Haledon (07522)

Haledon sits on a slope, and that changes the work. Water runs off these hillside lots fast, and on the older frame homes the gutters and downspouts are often undersized for the volume. We see a lot of low-pitched porch roofs and dormers where the flashing was never detailed correctly, and that is where leaks start. The tree canopy along streets like Haledon Avenue and Barbour Street drops debris that clogs gutters and traps moisture, and the freeze-thaw cycle we get in Passaic County works screws loose on older metal panels. Access is another factor: many of these lots are narrow with shared driveways, so staging materials and getting a crew safely on the roof takes planning, not just a ladder and a truck.

Our team has worked on everything from corrugated panel roofs on garages off Roe Street to standing seam and stone-coated steel on the larger colonials near the Haledon Reservoir. We pull permits through the borough, coordinate with historic review where it applies, and document existing conditions before we touch anything so you know what you are paying for.

Our services in Haledon

How a Job Works in Haledon

Step 1: You call (973) 333-4969 or request a free estimate online. We schedule an on-site assessment, walk the roof and the attic if accessible, and check the flashing, fasteners, and gutter condition. You get a written scope with photos and a clear price before any work begins.

Step 2: Once you approve, we pull the required Haledon roofing permit and schedule the work. On tight hillside lots we plan material delivery and dumpster placement around your driveway and your neighbor's property line. If your home is in a historic district or under HOA review, we help coordinate the panel profile and color approval before ordering materials.

Step 3: We protect your landscaping, clean the site daily, and do a final walkthrough with you. We magnet-sweep for nails, haul away all debris, and leave you with a written summary of the work and any maintenance items we noticed. We leave your property clean.

Pricing in Haledon depends on roof size, pitch, access, and the condition of the existing decking. As a ballpark, metal roof repair starts at $450, screw replacement and re-fastening starts at $750, and gutter work for metal roofs starts at $9 per linear foot. Full installations start at $8 per square foot for corrugated and ribbed panel roofing, $10 per square foot for standing seam, and $9 per square foot for metal shingle or stone-coated steel. A metal roof over existing shingles (retrofit) starts at $7 per square foot, which is often the right call on a Haledon two-family where the existing layer is still sound. We give free estimates at (973) 333-4969, and we will tell you honestly if a repair makes more sense than a replacement.

My Haledon home is on a steep hillside lot with a shared driveway. Can you still install a metal roof?
Yes. We deal with this regularly in Haledon. We plan material staging and dumpster placement around your driveway and coordinate with neighbors if we need temporary access. On steep grades we use roof anchors and fall protection, and we may hand-carry materials to avoid damaging landscaping. The estimate will note any access surcharge before you commit.
A storm just lifted panels on my roof in Haledon. How fast can you respond?
Call (973) 333-4969 and we will schedule a free inspection as quickly as possible, usually within a day or two for active leaks or wind damage. We can tarp or secure the area to prevent further water intrusion, then provide a written repair estimate. We do not promise insurance coverage, but we document the damage thoroughly for your claim.
What does a typical metal roof repair cost in Haledon?
Most repairs start at $450, covering minor leak fixes and flashing work. Screw replacement and re-fastening starts at $750. The final price depends on roof size, how many fasteners or seams are affected, and whether the leak has damaged decking underneath. We give you a fixed price after the free inspection.
Do I need a permit for a metal roof in Haledon?
Roofing permits are commonly required for a full replacement or re-roof in Haledon, and the borough building department sets the thresholds, fees, and inspection requirements. We pull the permit for you and schedule the required inspections. Rules can change, so we always confirm with the Haledon building department before starting.
My neighbor's tree hangs over my roof and my HOA has rules about metal roof color. Can you help?
We can help with both. For the tree, we document the overhang and can recommend trimming before work starts, though property line disputes are between you and your neighbor. For HOA approval, we provide color samples and panel profile specs for your board's review, and we wait for written approval before ordering materials.
Are you insured for work on my Haledon property?
Yes. We are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Haledon's climate?
In Haledon, the main issues are debris from the tree canopy and ice at the eaves. We recommend clearing gutters and downspouts twice a year, especially after fall leaf drop, and checking fasteners on older panels every few years. Snow guards help prevent ice sliding off the roof, and a coating can extend the life of an older metal roof. We offer free inspections to catch problems early.
Why choose us?

Trusted professionals in Paterson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Paterson

All your work handled by qualified professionals in Paterson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

283+ Verified Client Reviews in Paterson

⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Paterson · Response within 24h · No commitment · ☎ (973) 333-4969

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Paterson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm