Serving the Paterson area  ·  (973) 333-4969  ·  Open Mon-Sun 7am-7pm
📞 (973) 333-4969 Free Quote

Metal Roofing in North Haledon, NJ (07508) · Local Professionals

Paterson Metal Roofing · Fast response in North Haledon and the Paterson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+283Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

North Haledon is hill country, not flat suburb. The streets climb toward High Mountain, the lots are uneven, and the roofs take wind and snow from angles that flat-roof towns never see. Most of the housing stock here is 1950s to 1970s ranches, split-levels and colonials, with a growing number of larger custom homes on steep, wooded parcels.

That is why homeowners in 07508 call Paterson Metal Roofing. We know how ice forms at the eaves on a north-facing slope off Belmont Avenue, and we know which driveways on Squaw Brook Road are too narrow for a dumpster and a lift at the same time. We are based in Paterson, fully insured, and we work North Haledon and the surrounding Passaic County towns every week.

Metal Roofing in North Haledon (07508)

North Haledon sits on the rise between the Passaic River valley and High Mountain, and that elevation changes everything about a roof. The wind hits harder up here, and the snow sits longer on steep pitches and shaded north slopes. The housing stock is mostly mid-century ranches and split-levels with low-slope sections over additions and garages, plus newer colonials with complex rooflines, dormers and valleys. Many lots are cut into the grade, with retaining walls at the property line and narrow shared driveways. That means staging a metal roof here takes planning: where the panels land, how the crew gets up, and how we protect the landscaping below. We also see a lot of older roofs that have been patched over the years, and we tell homeowners honestly when a retrofit over existing shingles makes sense and when a full tear-off is the better call.

Our team has installed standing seam, corrugated panels, metal shingles and stone-coated steel across North Haledon and the Paterson area. We understand the local building department review, the way historic district rules can apply in nearby Paterson neighborhoods, and the practical reality of working on a hillside lot in February.

Our services in North Haledon

How a Job Works in North Haledon

Step 1: You call (973) 333-4969 or request a free estimate. We schedule an on-site assessment, walk the roof and the attic if accessible, check the flashing, fasteners and deck condition, and talk through options. You get a written scope and a clear price, not a pressure pitch.

Step 2: Once you approve, we pull the required roofing permit through the local building department and schedule the work. On North Haledon hillside properties we plan delivery and staging around narrow driveways and grade changes, and we protect siding, gutters and plantings before a single panel goes up. If your home is in an HOA or a design-reviewed area, we coordinate the paperwork and color and profile approval before ordering material.

Step 3: We clean the site daily, magnet-sweep for fasteners and scraps, and do a final walkthrough with you. We do not leave until you have seen the finished roof, the flashing details and the cleanup. Our team treats your property like a neighbor's, because in a town this size, you probably are one.

Pricing in North Haledon depends on roof size, pitch, access and condition. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, and stone-coated steel and metal shingles start at $9. Repairs start at $450, leak repairs at $450, screw replacement and re-fastening at $750, and flashing, chimney and skylight work at $600. Snow guards and ice protection start at $1,200, which is a common add-on on North Haledon's steeper roofs. Gutters for metal roofs start at $9 per linear foot. Steep pitches, multiple roof levels, tight access and urgent storm work can raise the number. Call (973) 333-4969 for a free estimate and a straight answer.

My North Haledon house sits on a slope near High Mountain and the roof takes a lot of wind. Is standing seam the right choice?
Standing seam is a strong fit for exposed, windy sites because the panels are fastened with concealed clips and raised seams, so there are fewer points for wind to grab. On a steep or exposed roof in North Haledon we also look at panel width, clip spacing and edge flashing details. We will tell you if a different profile makes more sense for your pitch and budget.
A storm just lifted panels on my roof in 07508. How fast can you get out?
We offer free storm and wind damage inspections and prioritize active leaks and lifted panels. Call (973) 333-4969, and we will schedule an assessment, document the damage for your insurance claim if you are filing one, and make temporary repairs safe before permanent work. We never promise coverage, but we do provide the photos and written scope your adjuster will want.
What does a metal roof replacement cost on a typical North Haledon ranch or split-level?
Most North Haledon ranches and split-levels fall in a range that starts around $9 per square foot for replacement, with standing seam starting at $10. The final number depends on square footage, roof complexity, whether we tear off existing layers, and whether you add snow guards or new gutters. We give you a written estimate after seeing the roof.
Do I need a permit for a metal roof in North Haledon, and who handles it?
A full replacement or re-roof generally requires a permit, and the requirements and inspection process are set by the local building department. We confirm the current rules with the department before work starts and handle the permit as part of the job. Rules can change, so we always verify rather than assume.
My neighbor's tree drops limbs on my roof and we share a property line. What should I do before work starts?
We inspect and document the roof condition before we begin, and we flag any overhanging branches or access issues at the property line. If your neighborhood has an HOA or design review, we help coordinate color and profile approval. For boundary questions, we recommend confirming your survey and talking with your neighbor early so there are no surprises on installation day.
Is your crew covered by insurance for work on my North Haledon property?
Yes. We are fully insured with general liability and workers' compensation coverage. We can provide proof of insurance before work begins so you are not exposed if something goes wrong on your property.
What maintenance should I do on a metal roof in North Haledon before winter?
Clear gutters and downspouts, check the flashing around chimneys and skylights, and look for loose fasteners or backed-out screws. On steep or shaded roofs, snow guards and ice protection help prevent ice dams at the eaves. A fall inspection is the best time to catch small issues before the freeze-thaw cycle starts. Call (973) 333-4969 to schedule one.
Why choose us?

Trusted professionals in Paterson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Paterson

All your work handled by qualified professionals in Paterson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

283+ Verified Client Reviews in Paterson

⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Paterson · Response within 24h · No commitment · ☎ (973) 333-4969

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Paterson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm