Serving the Paterson area  ·  (973) 333-4969  ·  Open Mon-Sun 7am-7pm
📞 (973) 333-4969 Free Quote

Metal Roofing in Hackensack, NJ (07601) · Local Professionals

Paterson Metal Roofing · Fast response in Hackensack and the Paterson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+283Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Hackensack is a city of layers, from the brick commercial blocks along Main Street to the older Victorians and Dutch Colonials tucked into neighborhoods like Fairmount and the Heights. The housing stock spans more than a century, and the roofs show it: slate on the grand old homes, asphalt shingles on the mid-century Capes and ranches, and flat or low-slope roofs on the downtown buildings. If you live near the Bergen County Courthouse or along the Hackensack River, you know how quickly a nor'easter can find every weak point in an aging roof.

That is why homeowners and property managers in 07601 call Paterson Metal Roofing. We have worked on everything from three-family frame houses off Anderson Street to commercial blocks near the George Washington Bridge approach, and we know the local building department's permit process and the design review that can apply in the historic districts. Our team is based in Paterson, just a short drive up Route 4 or I-80, so we can be on site quickly when a storm hits or a leak shows up.

Metal Roofing in Hackensack (07601)

Hackensack sits on the flat to gently rolling ground of the Hackensack River valley, with dense blocks of older homes and commercial buildings that often have tight side yards and shared driveways. That means access can be a challenge: we regularly stage materials on the street or in a neighbor's driveway (with permission) and use compact lifts to reach roofs that a full-size truck cannot get close to. The city's older brick and frame buildings also mean we frequently find multiple roof layers, deteriorated flashing, and masonry that needs attention before we can install new metal. Drainage matters here too: the flat lots and clay-heavy soil in some neighborhoods can send water toward foundations if gutters and downspouts are not sized and pitched correctly.

Our team has installed standing seam, metal shingle, corrugated panels, and stone-coated steel across Hackensack and the surrounding towns. We understand the local building stock, from the 1920s bungalows near Foschini Park to the newer colonials off Summit Avenue, and we can recommend a metal system that fits your roof's pitch, your budget, and the look of your block.

Our services in Hackensack

How a Job Works in Hackensack

Step 1: Call us at (973) 333-4969 or request a free estimate online. We will schedule a time to inspect your roof, measure it, and discuss options. For storm damage, we offer free inspections and can often get out the same day or next. We will also check whether your property is in a historic district or subject to HOA design review, because that can affect the panel profile and color you can use.

Step 2: Once you approve the estimate, we handle the permit application with the Hackensack building department. Permit timing varies, but we stay on top of it. On the job, our crew protects your landscaping and siding, removes the old roofing (or prepares it for a retrofit if you qualify), and installs the new metal roof with proper underlayment, flashing, and fasteners. Tight lots near downtown may require a dumpster permit or early morning deliveries, and we coordinate all of that.

Step 3: After installation, we clean the site thoroughly, using magnets to pick up stray screws and nails. We walk the roof with you, show you the finished work, and explain any maintenance. We do not consider the job done until you are satisfied and your property is as clean as we found it.

Pricing for metal roofing in Hackensack depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs start at $450, and screw replacement or re-fastening starts at $750. For commercial and agricultural buildings, we provide free estimates. Factors like steep pitch, multiple roof levels, tight access, and the need for structural repairs can affect the final cost. We give you a clear, written estimate before any work begins. Call (973) 333-4969 to schedule your free estimate.

My house in the Fairmount neighborhood has its original slate roof and I want to switch to metal. What should I expect?
Slate roofs are common in Fairmount and other older parts of Hackensack. We will inspect the roof deck and framing first, because slate is heavy and the structure may need reinforcement before we install metal. We can remove the slate and install a standing seam or metal shingle roof that mimics the look of slate but weighs much less. We will also check the flashing around chimneys and dormers, which often needs updating on these homes.
A storm just blew some panels loose on my commercial building near the courthouse. Can you help today?
Yes. We offer free storm damage inspections and emergency repairs. Call us at (973) 333-4969 and we will get a crew out to secure the roof, prevent further water intrusion, and provide a written estimate for permanent repairs. We work with property managers and can document the damage for your insurance claim.
What does a typical metal roof replacement cost for a three-family house in the 07601 zip code?
For a three-family house, the cost depends on the roof size and material. A basic corrugated panel roof might start around $5.50 per square foot, while standing seam starts at $10. Most three-family homes in Hackensack have roofs between 1,500 and 2,500 square feet, so you could be looking at a range from roughly $8,000 to $25,000. We provide a free on-site estimate so you get an accurate number.
Do I need a permit to replace my roof in Hackensack, and how long does it take?
Yes, a roofing permit is typically required for a full replacement. The Hackensack Building Department handles permits, and the timeline varies depending on their workload and the complexity of your project. We handle the application for you and schedule inspections as required. If your home is in a historic district, additional design review may apply, and we will guide you through that process.
My neighbor's tree branches hang over my roof. Can I trim them, and does my HOA need to approve the new roof color?
In New Jersey, you generally have the right to trim branches that overhang your property line, but it is best to talk to your neighbor first. For HOA approval, many associations in Hackensack have design guidelines for roof color and material. We can provide product samples and documentation to help you get approval before we order materials.
Are you insured for work on my Hackensack property?
Yes, we are fully insured, carrying both general liability and workers' compensation coverage.
What maintenance does a metal roof need in Hackensack's climate?
Metal roofs are low maintenance, but in Hackensack's freeze-thaw winters and humid summers, we recommend an annual inspection. Check for loose fasteners, debris in gutters, and any signs of wear around flashing. Snow guards are a good idea on steeper roofs to prevent snow slides, and we can install them. We also offer coating and painting services to extend the life of older metal roofs.
Why choose us?

Trusted professionals in Paterson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Paterson

All your work handled by qualified professionals in Paterson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

283+ Verified Client Reviews in Paterson

⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Paterson · Response within 24h · No commitment · ☎ (973) 333-4969

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Paterson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm