Serving the Paterson area  ·  (973) 333-4969  ·  Open Mon-Sun 7am-7pm
📞 (973) 333-4969 Free Quote

Metal Roofing in Garfield, NJ (07026) · Local Professionals

Paterson Metal Roofing · Fast response in Garfield and the Paterson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+283Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Garfield is a tight-knit city of mill-era homes and low-pitched roofs, squeezed between the Passaic River and the Bergen County line. The housing stock here is old, practical, and built for function: flat and low-slope roofs on the row houses and shops along Passaic Street and Market Street, plus plenty of corrugated metal on garages and workshops that date back to the city's industrial heyday. If you live near the Garfield Public Library or along the Belmont Avenue corridor, you know exactly the kind of roof we mean.

Homeowners in 07026 call Paterson Metal Roofing because we understand the specific demands of these roofs. The freeze-thaw cycles here are brutal, and the heavy snow and nor'easters we get each winter find every weak seam and loose fastener. We are based just across the river in Paterson, so we know the neighborhoods, the permits, and the weather that hits Garfield roofs year after year.

Metal Roofing in Garfield (07026)

Garfield's terrain and building stock create unique challenges. The city sits on the rocky Piedmont, and many properties have tight lots with limited access, especially in the dense blocks near the Passaic River. Low-pitched and flat roofs are common on the older two- and three-family frame houses and rowhouses, and these roofs are prone to ponding water and ice dams at the eaves. The ground can be uneven, and drainage is often poor, which means we pay extra attention to flashing and gutter systems. On the commercial and agricultural buildings, corrugated and ribbed panel roofing is the standard, and we have extensive experience with those profiles.

Our team has worked on hundreds of roofs in Garfield and the surrounding Passaic County area, from mill-era workshops to 1950s ranches and newer colonials. We know how to handle the tight access on streets like Dewitt Avenue and how to coordinate with the city's building department for permits. When you need a metal roof that can stand up to Garfield's winters, we are the local crew that delivers.

Our services in Garfield

How a Job Works in Garfield

Step 1: You call us at (973) 333-4969 or request a free estimate online. We schedule an on-site assessment at your convenience, where we inspect your existing roof, discuss your options, and provide a detailed written estimate. We will point out any issues we see and answer all your questions.

Step 2: Once you approve the estimate, we handle the permitting with the City of Garfield and schedule the work. On installation day, our crew arrives early, protects your landscaping and driveway, and gets to work. For tight lots or difficult access, we use specialized equipment and careful planning to ensure a smooth job. We also coordinate with your HOA if design approval is needed.

Step 3: After the work is complete, we do a thorough cleanup, haul away all debris, and walk the property with you to make sure you are satisfied. We do not consider a job done until you are happy with the result.

Metal roofing in Garfield is priced based on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical residential roof, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, metal roof over shingles starts at $7 per square foot. For smaller jobs, metal roof repair starts at $450, and screw replacement and re-fastening starts at $750. Corrugated and ribbed panel roofing, common on Garfield's garages and workshops, starts at $5.50 per square foot. We also offer free estimates for commercial and agricultural metal roofing. Call us at (973) 333-4969 to get a precise quote for your property.

My flat roof on my row house near Passaic Street keeps leaking at the seams. Can you repair it without replacing the whole roof?
Yes, we can often repair isolated leaks on flat and low-slope roofs. We will inspect the seams and flashing, and if the issue is localized, we can re-seal or replace the affected sections. For older roofs with multiple leaks, a full replacement might be more cost-effective in the long run. We will give you an honest assessment and options.
A storm just blew some panels off my metal roof in Garfield. How quickly can you respond?
We prioritize storm damage emergencies. Call us at (973) 333-4969 and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp the affected area to prevent further water damage and provide a repair estimate.
What is the typical cost to replace a metal roof on a two-family house in Garfield?
For a two-family house with a roof around 1,500 square feet, metal roof replacement typically ranges from $13,500 to $18,000, depending on the material and complexity. Standing seam costs more, starting at $10 per square foot, while corrugated panels are more economical. We provide free estimates so you can get an exact price for your home.
Do I need a permit from the City of Garfield to install a metal roof?
Yes, a building permit is generally required for a full roof replacement or re-roof. The City of Garfield Building Department oversees permits, and requirements can vary based on the scope of work. We handle the permit application process for you and ensure all work meets local codes.
My neighbor's tree branches hang over my roof, and I want to install a metal roof. What are the property line rules?
In New Jersey, you generally have the right to trim branches that overhang your property line, but it's best to check with your neighbor first. If the tree is on your neighbor's property, you cannot damage the tree. For HOA communities, there may be additional rules about tree maintenance. We can advise on roof placement and coordinate with your neighbor if access is needed.
Are you fully insured for roofing work in Garfield?
Yes, we are fully insured with general liability and workers' compensation coverage. Your property is protected when we work on your roof.
How often should I inspect my metal roof in Garfield to prevent winter ice dams?
We recommend an annual inspection in the fall, before the first snow. Check for loose fasteners, damaged seals, and debris in gutters. Ice dams form when heat escapes from the attic and melts snow, which refreezes at the eaves. Proper insulation and ventilation help, and we can install snow guards to reduce the risk. Call us for a free inspection.
Why choose us?

Trusted professionals in Paterson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Paterson

All your work handled by qualified professionals in Paterson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

283+ Verified Client Reviews in Paterson

⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Paterson · Response within 24h · No commitment · ☎ (973) 333-4969

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Paterson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm