Serving the Paterson area  ·  (973) 333-4969  ·  Open Mon-Sun 7am-7pm
📞 (973) 333-4969 Free Quote

Metal Roofing in Clifton, NJ (07013) · Local Professionals

Paterson Metal Roofing · Fast response in Clifton and the Paterson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+283Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Clifton's brick Cape Cods and Dutch Colonials were built to last, but the shingle roofs on top of them were not. If you live off Main Avenue or near the Clifton Commons, you already know how nor'easters and ice dams can find every weak spot in an aging roof.

Homeowners in 07013 call Paterson Metal Roofing because we understand the tight lots, the mature trees, and the freeze-thaw cycles that punish roofs here. We are based just down the road in Paterson, so we know Clifton's housing stock firsthand, from the two-family homes near the Botany Village to the larger colonials up in Athenia.

Metal Roofing in Clifton (07013)

Clifton sits on the same rocky Piedmont as Paterson, with dense blocks of turn-of-the-century frame houses and brick Capes that were never designed for today's weather swings. Many of the roofs we see in 07013 have three layers of shingles, low pitches, and dormers that collect ice at the eaves. The tree canopy along Grove Street and the streets off Van Houten Avenue drops limbs and fills gutters, and the freeze-thaw cycle in late winter pushes water under flashing and around chimneys. We handle the tight access on narrow lots near the Clifton Public Library and coordinate with the Clifton Building Department on permits, which are required for full replacements and re-roofs. Historic districts and HOA design review can also affect panel profiles and colors, so we check those before ordering materials.

Our team has worked on everything from corrugated panels on mill-era garages to standing seam on newer colonials in the Hillcrest area. We know which fasteners hold up to nor'easter wind and how to detail a metal roof over existing shingles to meet code on layer limits. Whether you are near the Great Falls or over by the Clifton Commons, we bring the same approach: measure twice, flash it right, and stand behind the work.

Our services in Clifton

How a Job Works in Clifton

Step 1: You call (973) 333-4969 or fill out our form, and we schedule a free on-site assessment. We walk the roof, check the attic and flashing, and talk through your options, whether that is a metal roof over shingles, a full replacement, or a repair. You get a written estimate with line items, no pressure.

Step 2: Once you approve, we pull the Clifton permits and order materials. On tight lots near Main Avenue, we plan deliveries for early morning and use smaller trucks to avoid blocking driveways. If your home is in an HOA, we submit the paperwork and wait for approval before we start. The crew protects your landscaping, tears off or preps the existing roof, and installs the new metal system with ice and water shield at the eaves and proper ventilation.

Step 3: We clean up every day and do a magnet sweep for nails at the end. You get a final walkthrough, and we do not leave until you are satisfied with the flashing, the fasteners, and the cleanup. We leave your property clean.

Pricing in Clifton depends on the size and pitch of your roof, the number of layers to remove, access, and whether there is rot or flashing damage. For a typical Cape Cod or Dutch Colonial in 07013, metal roof over shingles starts around $7 per square foot, while a full replacement starts at $9 per square foot. Standing seam runs from $10 per square foot, and repairs like leak fixes start at $450. We give you a free estimate at (973) 333-4969 so you know the real number before we start.

My Cape Cod in the Athenia section has ice dams every winter. Can a metal roof help?
Yes. Metal roofs shed snow and ice better than shingles, especially when paired with proper attic insulation and ventilation. We often install snow guards and ice protection at the eaves, and we check your flashing and drip edge. For homes in 07013 with dormers and low pitches, we also recommend ice and water shield along the eaves to prevent water backup.
A nor'easter just lifted some panels on my roof near Clifton Commons. How fast can you get there?
We prioritize storm damage calls in Clifton and the surrounding area. Call (973) 333-4969 and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on volume. We can tarp or secure the area to prevent further damage and provide a written estimate for repairs.
What does a metal roof over shingles cost for a two-family home in 07013?
For a typical two-family in Clifton, metal roof over shingles starts around $7 per square foot, but the final price depends on roof size, access, and the condition of the existing shingles. We verify that your roof meets code for overlay, which typically limits the number of layers. Call for a free estimate.
Do I need a permit from the City of Clifton for a metal roof replacement?
Yes, a building permit is generally required for a full replacement or re-roof in Clifton. We handle the permit application and coordinate inspections with the Clifton Building Department. Requirements can vary, so we always confirm the current rules before starting work.
My neighbor and I share a property line, and I want a metal roof that overhangs slightly. What are the rules?
Property line setbacks and overhangs are governed by local zoning and your deed. We recommend checking your survey and talking with your neighbor before installation. If you are in an HOA, design review may also apply. We can help you understand the typical requirements and coordinate as needed.
Are you fully insured for work on my Clifton home?
Yes, we carry general liability and workers' compensation insurance.
How often should I inspect my metal roof in Clifton?
We recommend an inspection after major storms and at least once a year, ideally in the fall before winter. Check for loose fasteners, debris in gutters, and any signs of flashing wear. We offer free estimates for inspections and can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Paterson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Paterson

All your work handled by qualified professionals in Paterson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

283+ Verified Client Reviews in Paterson

⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Paterson · Response within 24h · No commitment · ☎ (973) 333-4969

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Paterson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm