Serving the Paterson area  ·  (973) 333-4969  ·  Open Mon-Sun 7am-7pm
📞 (973) 333-4969 Free Quote

Metal Roofing in Totowa, NJ (07512) · Local Professionals

Paterson Metal Roofing · Fast response in Totowa and the Paterson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+283Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Totowa's hillside ranches and split-levels from the 1950s through the 1970s are hitting the age where shingle roofs start to fail, and that is exactly where we spend a lot of our time. If you live off Union Boulevard or up near Riverview Drive, you know how the grade and the tree cover treat a roof.

Homeowners in 07512 call Paterson Metal Roofing because we understand the specific wear patterns here: ice damming at the eaves on sloped lots, wind lifting older shingle tabs, and the constant battle against moss and debris from the mature oaks and maples. We are based just down the road in Paterson, so we know the housing stock and the local building department's expectations.

Metal Roofing in Totowa (07512)

Totowa is not a flat grid of identical lots. Many properties sit on hillsides with split-level entries, walkout basements, and roofs that are visible from the street at an angle. That means panel layout and color matter for curb appeal, and access can be tight on narrow driveways or when a garage is tucked under the main roofline. The older ranches often have low-slope porch sections and original decking that needs a careful inspection before we talk about a retrofit. We also see a lot of mature trees close to the house, which means gutters fill fast and ice dams form when snow slides and refreezes at the eave. Our team plans for that with proper underlayment, ice and water shield, and ventilation details that match the house, not a one-size-fits-all approach.

We have worked throughout Totowa and the surrounding Paterson area, from the streets near Totowa Public Library to the neighborhoods along the Passaic River side. That local experience means we can spot the difference between a simple re-roof and a job that needs decking repair or flashing rebuilds before we give you a number.

Our services in Totowa

How a Job Works in Totowa

Step 1: You call us at (973) 333-4969 or request a free estimate online. We schedule an on-site assessment at your Totowa property, inspect the roof, attic, and flashing, and talk through options like metal roof replacement, metal shingle roofing, or a retrofit over existing shingles if the code allows it. You get a clear written estimate with no pressure.

Step 2: Once you approve, we pull the required permits through the local building department and coordinate any HOA or historic review if your neighborhood has one. On installation day, our crew protects your landscaping and handles the tear-off or retrofit according to the plan. Tight hillside lots and steep driveways are common here, so we stage materials carefully and keep the work area safe.

Step 3: We clean up thoroughly, haul away old materials, and walk the finished roof with you. We do not leave until you have seen the flashing details, the fasteners, and the gutters, and you know exactly what was done.

Pricing in Totowa depends on the size and pitch of your roof, the condition of the decking, access, and the material you choose. For a typical ranch or split-level, metal roof installation starts around $8 per square foot, standing seam starts around $10 per square foot, and a metal roof replacement starts around $9 per square foot. If you are considering a retrofit over existing shingles, that starts around $7 per square foot, subject to code limits on layers. Metal shingle and stone-coated steel both start around $9 per square foot. Smaller repairs like leak repair start at $450, and screw replacement or re-fastening starts at $750. We give free estimates, so call (973) 333-4969 and we will give you a realistic number for your specific house.

My split-level in Totowa has a low-slope section over the entry, can you still install metal there?
Yes. Low-slope porch and entry roofs are common on Totowa split-levels. We use standing seam or corrugated panels with the correct underlayment and seam details for the pitch, and we check the decking and ventilation before recommending a product. The goal is to avoid trapped moisture and ice damming at that transition.
A storm just lifted some shingles and I have water coming in, how fast can you get to Totowa?
We prioritize active leaks and storm damage in Totowa and the surrounding area. Call (973) 333-4969 and describe the problem. We can often schedule a same-day or next-day inspection, and we will tarp or make temporary repairs if needed before a permanent fix.
What does a metal roof replacement cost for a typical 1950s ranch in 07512?
Most ranch replacements fall in the range of $9 to $14 per square foot installed, depending on the panel type, decking condition, and whether we are removing one or two layers of shingles. A free on-site estimate will give you an exact figure, and we explain the cost factors clearly.
Do I need a permit from Totowa for a metal roof, and how long does it take?
Yes, a roofing permit is typically required for a full replacement or re-roof in Totowa. The exact requirements and inspection schedule are set by the local building department, and we handle the paperwork and coordination for you. Timing varies, so we confirm the current process before we start.
My neighbor's tree hangs over my roof, and my HOA has rules about roof color, can you help with that?
We can help you navigate HOA design review by providing product samples and specifications for approval. For overhanging branches, that is a property-line matter between you and your neighbor, but we can advise on trimming that affects your roof and gutters. We do not trim neighbor trees without permission.
Are you fully insured for work at my Totowa home?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance should I do on a metal roof in Totowa to prevent ice dams?
Keep gutters and downspouts clear of leaves from the mature trees common here, and check that snow does not pile up at the eaves. We recommend an annual inspection in late fall. If you have a history of ice dams, we can add snow guards or improve attic insulation and ventilation to reduce the problem.
Why choose us?

Trusted professionals in Paterson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Paterson

All your work handled by qualified professionals in Paterson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

283+ Verified Client Reviews in Paterson

⭐⭐⭐⭐⭐ 4.9/5 · 283 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Paterson · Response within 24h · No commitment · ☎ (973) 333-4969

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Paterson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm